Finisar SFP+ 1310nm 10km network transceiver module Fiber optic 11300 Mbit/s SFP+

Finisar SFP+ 1310nm 10km. SFP transceiver type: Fiber optic, Maximum data transfer rate: 11300 Mbit/s, Interface type: SFP+. Input voltage: 3.3 V
Manufacturer: Finisar
SKU: 3220190
Manufacturer part number: FTLX1472M3BCL
$146.26
Finisar's FTLX1472M3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit, multi-rate links up to maximum 10km over G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432, ITU-T G.693 VSR2000-2R1, SDH I-64.1 and OTN P1I1-2D1 (up to 2km), IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L (up to 10km). Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1472M3BCL transceivers utilize internal clock and date recovery (CDR) units on the transmitter and the receiver chains for SONET/SDH jitter compliance and to enhance the signal integrity on XFP XFI-like host card designs. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038. - Hot-pluggable SFP+ footprint - Supports 8.5Gb/s and from 9.95 to 11.3Gb/s bit rates - Power dissipation < 1.5W - RoHS-6 compliant (lead-free) - Commercial temperature range -5°C to 75°C - Single 3.3V power supply - Maximum link length of 10km - Uncooled 1310nm DFB laser - Receiver limiting electrical interface - Duplex LC connector - Built-in digital diagnostic functions
Finisar's FTLX1472M3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit, multi-rate links up to maximum 10km over G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432, ITU-T G.693 VSR2000-2R1, SDH I-64.1 and OTN P1I1-2D1 (up to 2km), IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L (up to 10km). Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1472M3BCL transceivers utilize internal clock and date recovery (CDR) units on the transmitter and the receiver chains for SONET/SDH jitter compliance and to enhance the signal integrity on XFP XFI-like host card designs. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038. - Hot-pluggable SFP+ footprint - Supports 8.5Gb/s and from 9.95 to 11.3Gb/s bit rates - Power dissipation < 1.5W - RoHS-6 compliant (lead-free) - Commercial temperature range -5°C to 75°C - Single 3.3V power supply - Maximum link length of 10km - Uncooled 1310nm DFB laser - Receiver limiting electrical interface - Duplex LC connector - Built-in digital diagnostic functions
*
*
*