B&B Electronics 852-11912 network media converter 1000 Mbit/s 850 nm Multi-mode

B&B Electronics 852-11912. Maximum data transfer rate: 1000 Mbit/s, Converter input interface: 1000Base-SX, Ethernet interface type: Gigabit Ethernet. Fiber optic connector: SC, Connectivity technology: Wired. Maximum transfer distance: 21653.5" (550 m), Wavelength: 850 nm, Fiber mode structure: Multi-mode. Certification: FCC A, UL/cUL, CSA, CE. Input voltage: 100 - 240 V, AC input frequency: 50 - 60 Hz
Manufacturer: B&B Electronics
SKU: 3761715
Manufacturer part number: 852-11912
$698.25
Supporting the IEEE 802.3af and 802.3at standards, the multi-port PoE and PoE+ Giga-McBasic media converters offer unparalleled installation flexibility and cost-savings. The PoE and PoE+ Giga-McBasic are the perfect solutions for network applications that require Power over Ethernet for locations inside buildings where PoE is required to power an Ethernet device. Their small, table-top design and durability make them perfect for installation anywhere space is limited. Additionally, both units are manufactured with an internal AC power supply. This feature significantly increases reliability over products that use awkward, external AC/DC power transformers. The PoE Giga-McBasic unit comes with one SFP or fixed fiber transceiver, one PoE/PSE 10/100/1000Base-T copper port that provides 15.4 Watts of power with data, and one 10/100/1000 Mbps copper port to connect a non-PoE unit to the same fiber uplink. The PoE+ Giga-McBasic unit comes with one SFP or fixed fiber transceiver and two PoE/PSE 10/100/1000Base-T copper. Each port provides 25.5 Watts of power with data. As a fiber-fed media converter, it provides both power and data to a remote device over standard CAT5, eliminating the need for additional power to the remote device. The copper ports Auto Negotiate to the connected device’s speed and duplex mode: 10 Mbps, 100 Mbps or 1000 Mbps, and HDX or FDX (including Flow Control). Additionally, both models support jumbo frames up to 10240 bytes.
Supporting the IEEE 802.3af and 802.3at standards, the multi-port PoE and PoE+ Giga-McBasic media converters offer unparalleled installation flexibility and cost-savings. The PoE and PoE+ Giga-McBasic are the perfect solutions for network applications that require Power over Ethernet for locations inside buildings where PoE is required to power an Ethernet device. Their small, table-top design and durability make them perfect for installation anywhere space is limited. Additionally, both units are manufactured with an internal AC power supply. This feature significantly increases reliability over products that use awkward, external AC/DC power transformers. The PoE Giga-McBasic unit comes with one SFP or fixed fiber transceiver, one PoE/PSE 10/100/1000Base-T copper port that provides 15.4 Watts of power with data, and one 10/100/1000 Mbps copper port to connect a non-PoE unit to the same fiber uplink. The PoE+ Giga-McBasic unit comes with one SFP or fixed fiber transceiver and two PoE/PSE 10/100/1000Base-T copper. Each port provides 25.5 Watts of power with data. As a fiber-fed media converter, it provides both power and data to a remote device over standard CAT5, eliminating the need for additional power to the remote device. The copper ports Auto Negotiate to the connected device’s speed and duplex mode: 10 Mbps, 100 Mbps or 1000 Mbps, and HDX or FDX (including Flow Control). Additionally, both models support jumbo frames up to 10240 bytes.
*
*
*