Cisco MDS 9710 V2 Managed Gigabit Ethernet (10/100/1000) Gray

Cisco MDS 9710 V2. Switch type: Managed. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 2, Console port: RS-232. Full duplex. Power connector: AC-in jack. Rack mounting
Manufacturers: Cisco Systems , Cisco
SKU: 5804916
Manufacturer part number: DS-C9710-V2K9
MSRP: $211,907.54
$173,075.48
Enable enterprise clouds. Transform large storage networks. Lower operating costs. Deploy Fibre Channel, IBM Fibre Connectivity (FICON), Fibre Channel over IP (FCIP), and Fibre Channel over Ethernet (FCoE) on a single fabric. With the Cisco® MDS 9710 Multilayer Director (Figure 1), you’ll meet the stringent requirements of large virtualized storage environments. As a director-class SAN switch, the MDS 9710 uses the same operating system and management interface as other Cisco data center switches. It brings intelligent capabilities to a high-performance, protocol-independent switch fabric. You’ll gain uncompromising availability, security, and scalability; simplified management; and the capability to flexibly integrate new technologies.

Reduce total cost of ownership with SAN consolidation

With the amount of data growing exponentially, organizations need efficient, cost-effective, large-scale SANs. Scale while managing your Total Cost of Ownership (TCO) with industry-leading port densities of up to 384 32-Gbps Fibre Channel ports per chassis. Deploy 1.5-Tbps front-panel Fibre Channel performance per slot and up to 24-Tbps front-panel Fibre Channel line-rate nonblocking system-level switching. Deploy intelligent fabric services, VSANs for consolidating physical SAN islands while maintaining logical boundaries, and IVR for sharing resources across VSANs. Consolidate your data into fewer, larger, and more manageable SANs, thus reducing the hardware footprint and associated Capital Expenditures (CapEx) and Operating Expenses (OpEx). On unified fabrics with converged LAN and SAN environments using lossless Ethernet, multihop FCoE protects your investments in existing storage infrastructure with any-to-any connectivity across multiple protocols.

Enterprise-class availability

The MDS 9710 is designed from the beginning for high availability. In addition to meeting the basic requirements of nondisruptive software upgrades and redundancy of all critical hardware components, the MDS 9710 software architecture offers outstanding availability. The Cisco MDS 9700 Series Supervisor-1 Module automatically restarts failed processes, making the MDS 9710 exceptionally robust. In the rare event that a supervisor module is reset, complete synchronization between the active and standby supervisor modules helps ensure stateful failover with no disruption of traffic.
Enable enterprise clouds. Transform large storage networks. Lower operating costs. Deploy Fibre Channel, IBM Fibre Connectivity (FICON), Fibre Channel over IP (FCIP), and Fibre Channel over Ethernet (FCoE) on a single fabric. With the Cisco® MDS 9710 Multilayer Director (Figure 1), you’ll meet the stringent requirements of large virtualized storage environments. As a director-class SAN switch, the MDS 9710 uses the same operating system and management interface as other Cisco data center switches. It brings intelligent capabilities to a high-performance, protocol-independent switch fabric. You’ll gain uncompromising availability, security, and scalability; simplified management; and the capability to flexibly integrate new technologies.

Reduce total cost of ownership with SAN consolidation

With the amount of data growing exponentially, organizations need efficient, cost-effective, large-scale SANs. Scale while managing your Total Cost of Ownership (TCO) with industry-leading port densities of up to 384 32-Gbps Fibre Channel ports per chassis. Deploy 1.5-Tbps front-panel Fibre Channel performance per slot and up to 24-Tbps front-panel Fibre Channel line-rate nonblocking system-level switching. Deploy intelligent fabric services, VSANs for consolidating physical SAN islands while maintaining logical boundaries, and IVR for sharing resources across VSANs. Consolidate your data into fewer, larger, and more manageable SANs, thus reducing the hardware footprint and associated Capital Expenditures (CapEx) and Operating Expenses (OpEx). On unified fabrics with converged LAN and SAN environments using lossless Ethernet, multihop FCoE protects your investments in existing storage infrastructure with any-to-any connectivity across multiple protocols.

Enterprise-class availability

The MDS 9710 is designed from the beginning for high availability. In addition to meeting the basic requirements of nondisruptive software upgrades and redundancy of all critical hardware components, the MDS 9710 software architecture offers outstanding availability. The Cisco MDS 9700 Series Supervisor-1 Module automatically restarts failed processes, making the MDS 9710 exceptionally robust. In the rare event that a supervisor module is reset, complete synchronization between the active and standby supervisor modules helps ensure stateful failover with no disruption of traffic.

Products specifications

Attribute name Attribute value
Width 15.9"
Depth 21.8"
Height 1.73"
Weight 20 lbs
Installed SFP modules quantity 0
Installed SFP+ modules quantity 0
Power supply included Yes
Access Control List (ACL) Yes
Rate limiting Yes
Airflow direction Front-to-back airflow
Authentication type RADIUS, TACACS+
USB Type-A ports quantity 1
Compliance certificates CE, UL, Federal Communications Commission (FCC), ICES, VCCI
Number of management ports 1 pc(s)
Switch Type Managed
Power Source AC
Technical details
Product color Gray
Features
Full duplex Yes
LED indicators System
Performance
Console port RS-232
Fiber optic connector SFP+
Other features
Rack mounting Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 2
Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
Power connector AC-in jack
Power
AC input frequency 50/60 Hz
AC input voltage 100 - 240 V
Redundant power supply (RPS) support Yes
Network
10G support Yes
Quality of Service (QoS) support Yes
Auto-sensing Yes
Operational conditions
Operating temperature (T-T) 0 - 40 °C
Storage temperature (T-T) -40 - 70 °C
Operating relative humidity (H-H) 10 - 90 %
Storage relative humidity (H-H) 10 - 90 %
Operating altitude -2362.2 - 78740.2"
Management features
Web-based management Yes
Security
Security algorithms SSH-2, SNMPv3
Power over Ethernet (PoE)
Power over Ethernet (PoE) No
*
*
*

Products specifications

Attribute name Attribute value
Width 15.9"
Depth 21.8"
Height 1.73"
Weight 20 lbs
Installed SFP modules quantity 0
Installed SFP+ modules quantity 0
Power supply included Yes
Access Control List (ACL) Yes
Rate limiting Yes
Airflow direction Front-to-back airflow
Authentication type RADIUS, TACACS+
USB Type-A ports quantity 1
Compliance certificates CE, UL, Federal Communications Commission (FCC), ICES, VCCI
Number of management ports 1 pc(s)
Switch Type Managed
Power Source AC
Technical details
Product color Gray
Features
Full duplex Yes
LED indicators System
Performance
Console port RS-232
Fiber optic connector SFP+
Other features
Rack mounting Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 2
Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
Power connector AC-in jack
Power
AC input frequency 50/60 Hz
AC input voltage 100 - 240 V
Redundant power supply (RPS) support Yes
Network
10G support Yes
Quality of Service (QoS) support Yes
Auto-sensing Yes
Operational conditions
Operating temperature (T-T) 0 - 40 °C
Storage temperature (T-T) -40 - 70 °C
Operating relative humidity (H-H) 10 - 90 %
Storage relative humidity (H-H) 10 - 90 %
Operating altitude -2362.2 - 78740.2"
Management features
Web-based management Yes
Security
Security algorithms SSH-2, SNMPv3
Power over Ethernet (PoE)
Power over Ethernet (PoE) No