Fast Ethernet to Fiber Desktop Media Converter with USB power
This desktop media converter features 100TX to 100FX conversion with multi-mode SC fiber connector supporting a distance up to 2km. At just 1.25 inches wide × 3.6 inches deep × 0.85 inches high, this media converter can easily fit into the palm of a hand.
Products specifications
Attribute name | Attribute value |
---|
Width | 1.25" |
Height | 0.85" |
Weight | 3.99 oz |
Depth | 3.6" |
Internal | No |
Product color | Gray |
Data transfer rate | 100 Mbit/s |
Fiber mode structure | Multi-mode |
LED indicators | Yes |
Tx power (min) | -22.5 dBmW |
Rx power (max) | -34 dBmW |
Fiber cable diameters supported (core/cladding) | Y |
Rx power (min) | -32 dBmW |
Maximum data transfer rate | 100 Mbit/s |
Duplex system | Full, Half |
Tx power (max) | -14 dBmW |
Fiber optic connector | SC |
Maximum transfer distance | 78740.2" |
Wavelength | 1310 nm |
Networking standards | IEEE 802.1Q |
Auto MDI/MDI-X | Yes |
Connectivity technology | Wired |
Power consumption (typical) | 1.5 W |
Converter input interface | 12 V |
Converter output interface | 100Base-FX |
Packet forwarding rate (10 Mbps) | 14880 pps |
Packet forwarding rate (100 Mbps) | 148800 pps |
Packet forwarding rate (1 Gbps) | 1488000 pps |
Ethernet interface type | Fast Ethernet |
VLAN support | Yes |
Storage temperature (T-T) | 10 - 100 % |
Operating temperature (T-T) | 0 - 40 °C |
Operating relative humidity (H-H) | 5 - 95 % |
Storage relative humidity (H-H) | 5 - 95 % |
Operating altitude | 0 - 120000" |