Tycon Power Systems POE/Solar charge controllers have dual inputs to charge batteries from a POE source and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical applications. The solar input can handle up to 8A. The POE input up to 2.5A. They have a built in POE inserter that delivers 24V 1.25A at the POE out port. They also have a secondary wire terminal 12V 1.5A output. They have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over discharge.
The built-in overdischarge protection and low self consumption ensures the battery is not overdischarged, which greatly increases the life of the batteries.
They have five LED indicators to give a quick visual status if current is being supplied by a POE source or solar panel, if battery is charging, If load output is turned on and a warning if battery is connected with reverse polarity.
Solar and Battery Connections are via 4 wire terminals for wire size up to 10AWG. POE Input and Output is via 2 RJ45 shielded connectors.
The controllers are externally fused with a standard replaceable fuse.
Products specifications
| Attribute name |
Attribute value |
|
Width
|
6.26" |
|
Depth
|
4.65" |
|
Height
|
1.57" |
|
Weight
|
11 oz |
|
Built-in display
|
No |
|
Product color
|
Black |
|
Output current
|
85176990 |
|
Output voltage
|
24 V |
|
Power protection features
|
Over voltage, Overcharge, Overdischarge, Reverse polarity, Short circuit |
|
Power consumption (typical)
|
0.5 W |
|
Operating temperature (T-T)
|
20 G |
|
Battery voltage
|
12 V |
