Tripp Lite PINV2000SWL-120 power adapter/inverter Auto 2000 W Black

Tripp Lite PINV2000SWL-120. Purpose: Car inverter, Power supply type: Auto, Input voltage: 12 V. Product color: Black, Housing material: Aluminum, Steel, Cooling type: Active. Sustainability certificates: Federal Communications Commission (FCC). Width: 15.4" (390.1 mm), Depth: 9.82" (249.4 mm), Height: 4" (101.6 mm). Quantity per pack: 1 pc(s), Package width: 12.5" (317.5 mm), Package depth: 19.6" (497.8 mm)
Manufacturer: Tripp Lite
SKU: 7477616
Manufacturer part number: PINV2000SWL-120
UPC: 0037332266750
MSRP: $824.00
$596.25
Industrial-Grade Inverter Charges and Powers Multiple Electronic Devices in Your Vehicle You don’t have to be near an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This 2000W mobile inverter converts 12V DC power from your car, utility truck, fleet vehicle, boat or RV’s battery into pure sine wave 110V AC power. Just connect the included battery cables between the PINV2000SWL-120’s DC input terminals and the positive and negative terminals on your vehicle’s battery. An LCD displays capacity, voltage, frequency, current and fault information. GFCI-Protected AC Outlets Provide Portable Power for Your Mobile Applications This heavy-duty power inverter provides a modified sine wave for use at remote locations, such as campgrounds, construction sites and mobile offices. Two NEMA 5-15/20R outlets deliver a continuous output of 2000W and a peak surge output of 4000W. That’s plenty to operate a variety of appliances and power tools, such as low-power lights, telemetry equipment, smart battery rechargers for small battery-operated power tools, and mobile office equipment. Both outlets feature OSHA-compliant GFCI (Ground Fault Circuit Interrupter) protection to shield you from electrical hazards due to excessive fault current. USB Charging Ports Keep Your Devices at Full Strength A 5V USB-A port outputs DC power up to 2.1A. A USB-C port outputs 5V/9V/12V fast-charging up to 18W maximum. Both USB ports remain active when the inverter’s on/off switch is set to Off. This allows you to charge your smartphone, tablet, laptop or GPS unit without draining too much power from the vehicle’s battery. Includes the Latest Safety Features to Protect Your Equipment and Battery The on/off switch offers one-touch control over all AC outlets. If the power input from the vehicle’s battery drops below 10V or exceeds 16V, the PINV2000SWL-120 will automatically shut down. Green and red LEDs indicate normal and improper operation. The temperature-controlled fan system begins cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively low voltage or fault conditions. Remote Control Module Allows Power Control from 20 ft. Away The included PINVSWRM remote control module with 20-foot (6-meter) cable connects to the telephone-style RJ12 jack on the inverter’s front panel. The module lets you mount the inverter out of sight, such as below your truck cab’s jump seat or inside the glove compartment, and operate it from your vehicle’s dashboard. The green LED confirms the inverter is powered on and operating correctly. Brackets Included for Permanent Mounting The industrial power inverter’s aluminum housing withstands the rigors of worksites, construction sites, business trips and family vacations. Use the built-in mounting brackets and included hardware to permanently install the inverter in a horizontal position.

 

  • Provides pure sine wave power for appliances, power tools and other electronics
  • Ideal for areas without power outlets, such as construction sites or mobile offices
  • NEMA 5-15/20R GFCI outlets deliver 2000W continuous/4000W peak output
  • USB charging ports keep smartphones, tablets and laptops at full capacity
  • Wired remote module extends power control to cab of utility or work truck
Industrial-Grade Inverter Charges and Powers Multiple Electronic Devices in Your Vehicle You don’t have to be near an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This 2000W mobile inverter converts 12V DC power from your car, utility truck, fleet vehicle, boat or RV’s battery into pure sine wave 110V AC power. Just connect the included battery cables between the PINV2000SWL-120’s DC input terminals and the positive and negative terminals on your vehicle’s battery. An LCD displays capacity, voltage, frequency, current and fault information. GFCI-Protected AC Outlets Provide Portable Power for Your Mobile Applications This heavy-duty power inverter provides a modified sine wave for use at remote locations, such as campgrounds, construction sites and mobile offices. Two NEMA 5-15/20R outlets deliver a continuous output of 2000W and a peak surge output of 4000W. That’s plenty to operate a variety of appliances and power tools, such as low-power lights, telemetry equipment, smart battery rechargers for small battery-operated power tools, and mobile office equipment. Both outlets feature OSHA-compliant GFCI (Ground Fault Circuit Interrupter) protection to shield you from electrical hazards due to excessive fault current. USB Charging Ports Keep Your Devices at Full Strength A 5V USB-A port outputs DC power up to 2.1A. A USB-C port outputs 5V/9V/12V fast-charging up to 18W maximum. Both USB ports remain active when the inverter’s on/off switch is set to Off. This allows you to charge your smartphone, tablet, laptop or GPS unit without draining too much power from the vehicle’s battery. Includes the Latest Safety Features to Protect Your Equipment and Battery The on/off switch offers one-touch control over all AC outlets. If the power input from the vehicle’s battery drops below 10V or exceeds 16V, the PINV2000SWL-120 will automatically shut down. Green and red LEDs indicate normal and improper operation. The temperature-controlled fan system begins cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively low voltage or fault conditions. Remote Control Module Allows Power Control from 20 ft. Away The included PINVSWRM remote control module with 20-foot (6-meter) cable connects to the telephone-style RJ12 jack on the inverter’s front panel. The module lets you mount the inverter out of sight, such as below your truck cab’s jump seat or inside the glove compartment, and operate it from your vehicle’s dashboard. The green LED confirms the inverter is powered on and operating correctly. Brackets Included for Permanent Mounting The industrial power inverter’s aluminum housing withstands the rigors of worksites, construction sites, business trips and family vacations. Use the built-in mounting brackets and included hardware to permanently install the inverter in a horizontal position.

 

  • Provides pure sine wave power for appliances, power tools and other electronics
  • Ideal for areas without power outlets, such as construction sites or mobile offices
  • NEMA 5-15/20R GFCI outlets deliver 2000W continuous/4000W peak output
  • USB charging ports keep smartphones, tablets and laptops at full capacity
  • Wired remote module extends power control to cab of utility or work truck
Products specifications
Attribute nameAttribute value
Master (outer) case length2
Width15.4"
Height4"
Weight12.2 lbs
Output frequency60 Hz
Master (outer) case weight30 lbs
Master (outer) case width20.4"
Country of OriginChina
Depth9.82"
Housing MaterialAluminum, Steel
Master (outer) case GTIN (EAN/UPC)10037332266757
Master (outer) case height13.5"
Harmonized System (HS) code8504.40.9570
Technical details
Sustainability certificatesFederal Communications Commission (FCC)
Product colorBlack
Sustainability complianceY
Features
Purpose60 Hz
Output voltage110 V
Power current typeDC-to-AC
Built-in fanY
Cooling typeActive
LED indicatorsY
Power supply typeAuto
Output power2000 W
Packaging data
Package depth19.6"
Package height6.2"
Package weight14.2 lbs
Package width12.5"
Logistics data
Quantity per master (outer) case2 pc(s)
Packaging content
Quantity per pack1 pc(s)
Ports & interfaces
USB ports quantity2
Power
Input voltage12 V
Power protection featuresOverload
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
Storage relative humidity (H-H)0 - 95 %
*
*
*
Products specifications
Attribute nameAttribute value
Master (outer) case length2
Width15.4"
Height4"
Weight12.2 lbs
Output frequency60 Hz
Master (outer) case weight30 lbs
Master (outer) case width20.4"
Country of OriginChina
Depth9.82"
Housing MaterialAluminum, Steel
Master (outer) case GTIN (EAN/UPC)10037332266757
Master (outer) case height13.5"
Harmonized System (HS) code8504.40.9570
Technical details
Sustainability certificatesFederal Communications Commission (FCC)
Product colorBlack
Sustainability complianceY
Features
Purpose60 Hz
Output voltage110 V
Power current typeDC-to-AC
Built-in fanY
Cooling typeActive
LED indicatorsY
Power supply typeAuto
Output power2000 W
Packaging data
Package depth19.6"
Package height6.2"
Package weight14.2 lbs
Package width12.5"
Logistics data
Quantity per master (outer) case2 pc(s)
Packaging content
Quantity per pack1 pc(s)
Ports & interfaces
USB ports quantity2
Power
Input voltage12 V
Power protection featuresOverload
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
Storage relative humidity (H-H)0 - 95 %