The SGFEB provides a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment. Deploying fiber into today’s networks provides the ability to transmit data over significantly longer distances than is possible on copper. Fiber also protects your data from external sources of noise and interference, improving network performance.
Operating at Layer 2, this converter not only converts copper to fiber, it also does Rate conversion, converting 10/100/1000 copper to 1000Base fiber.
Products specifications
| Attribute name |
Attribute value |
|
Width
|
SC |
|
Depth
|
4.8" |
|
Height
|
0.984" |
|
Weight
|
31.7 oz |
|
Certification
|
1000Base-SX |
|
Internal
|
N |
|
Fiber mode structure
|
Single-mode |
|
LED indicators
|
Y |
|
Link budget
|
10.5 dB |
|
Fiber optic connector
|
LC |
|
Maximum transfer distance
|
393700.8" |
|
Networking standards
|
IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3z |
|
Maximum data transfer rate
|
1000 Mbit/s |
|
Wavelength
|
1310 nm |
|
Ethernet LAN (RJ-45) ports
|
1 |
|
Connectivity technology
|
Wired |
|
DC-in jack
|
Y |
|
Input voltage
|
24 V |
|
Power consumption (typical)
|
2.2 W |
|
Jumbo frames
|
1000Base-SX |
|
Converter input interface
|
10Base-T, 100Base-T, 1000Base-T |
|
Ethernet interface type
|
Gigabit Ethernet |
|
Ethernet LAN data rates
|
10,100,1000 Mbit/s |
|
Jumbo frames support
|
Y |
|
Converter output interface
|
1000Base-LX |
|
Storage temperature (T-T)
|
10 - 100 % |
|
Operating temperature (T-T)
|
0 - 50 °C |
|
Operating relative humidity (H-H)
|
5 - 95 % |
