The T1/E1 copper to fiber network interface device (NID) provides a solution for those users that need to extend T1/E1 connections over fiber.
The T1/E1 supports Small Form Pluggable (SFP) transceivers to support a variety of fiber types, distances and wavelengths to provide maximum flexibility across a variety of network topologies. The use of Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized to further increase the bandwidth capacity of the fiber infrastructure.
The T1/E1NID must be used in pairs. A typical installation will include a chassis card installed in the ION Platform locally and a stand-alone device installed at the remote location.
- Remote in-band management
- Local or Remote Loopbacks - Copper or Fiber
- Switch selectable for T1 or E1
- Remote firmware upgrade
- LEDs for immediate visual status
- Supports dual or single fiber
- Supports multimode and single mode fiber at a variety of distances
- Supports CWDM SFPs
- SNMP management when used with ION chassis and management module
- Remote standalone can be managed by local peer
Products specifications
| Attribute name |
Attribute value |
|
Receive power
|
-8.0 dBmW |
|
Certification
|
CISPR/EN55022 A, FCC A, CE, UL60950 |
|
Internal
|
N |
|
Product color
|
3.23 x 6.5 x 0.984" |
|
Fiber mode structure
|
Single-mode |
|
LED indicators
|
Y |
|
Output voltage
|
12 V |
|
Dimensions (WxDxH)
|
3.23 x 6.5 x 0.984" |
|
Package weight
|
31.7 oz |
|
Maximum data transfer rate
|
1 |
|
Tx power (min)
|
Y |
|
Maximum transfer distance
|
787401.6" |
|
Tx power (max)
|
-8 dBmW |
|
Sensitivity
|
-31 dBmW |
|
Link budget
|
16 dB |
|
Fiber optic connector
|
SC |
|
Wavelength
|
1310 nm |
|
Fiber ports quantity
|
1 |
|
Interface
|
RJ-48 |
|
Connectivity technology
|
Wired |
|
DC-in jack
|
Y |
|
Power consumption (typical)
|
2.6 W |
|
Input voltage
|
100 - 240 V |
|
External power adapter
|
Y |
|
Operating temperature (T-T)
|
-10 - 65 °C |
|
Operating relative humidity (H-H)
|
5 - 95 % |
|
Operating altitude
|
0 - 118110.2" |
