You have no items in your shopping cart.
Menu
Menu
Transition Networks C6010-1040 network media converter Internal1

Transition Networks C6010-1040 network media converter Internal

Transition Networks C6010-1040. Fiber optic connector: SFP, Connectivity technology: Wired. Certification: CISPR/EN55022 A; FCC A; CE. Power consumption (typical): 2.6 W. Package weight: 15.9 oz (450 g). Dimensions (WxDxH): 0.866 x 6.5 x 3.39" (22 x 165 x 86 mm), Connector(s): RJ-48
Manufacturer: Transition Networks
SKU: 6759981
Manufacturer part number: C6010-1040
UPC: 0648177031368
MSRP: $812.00
$714.66
The T1/E1 copper to fiber network interface device (NID) provides a solution for those users that need to extend T1/E1 connections over fiber. The T1/E1 supports Small Form Pluggable (SFP) transceivers to support a variety of fiber types, distances and wavelengths to provide maximum flexibility across a variety of network topologies. The use of Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized to further increase the bandwidth capacity of the fiber infrastructure. The T1/E1NID must be used in pairs. A typical installation will include a chassis card installed in the ION Platform locally and a stand-alone device installed at the remote location. - Remote in-band management - Local or Remote Loopbacks - Copper or Fiber - Switch selectable for T1 or E1 - Remote firmware upgrade - LEDs for immediate visual status - Supports dual or single fiber - Supports multimode and single mode fiber at a variety of distances - Supports CWDM SFPs - SNMP management when used with ION chassis and management module - Remote standalone can be managed by local peer
The T1/E1 copper to fiber network interface device (NID) provides a solution for those users that need to extend T1/E1 connections over fiber. The T1/E1 supports Small Form Pluggable (SFP) transceivers to support a variety of fiber types, distances and wavelengths to provide maximum flexibility across a variety of network topologies. The use of Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized to further increase the bandwidth capacity of the fiber infrastructure. The T1/E1NID must be used in pairs. A typical installation will include a chassis card installed in the ION Platform locally and a stand-alone device installed at the remote location. - Remote in-band management - Local or Remote Loopbacks - Copper or Fiber - Switch selectable for T1 or E1 - Remote firmware upgrade - LEDs for immediate visual status - Supports dual or single fiber - Supports multimode and single mode fiber at a variety of distances - Supports CWDM SFPs - SNMP management when used with ION chassis and management module - Remote standalone can be managed by local peer
Products specifications
Attribute nameAttribute value
Design
Certification-10 - 65 °C
InternalY
Features
LED indicatorsY
Weight & dimensions
Dimensions (WxDxH)0.866 x 6.5 x 3.39"
Packaging data
Package weight15.9 oz
Performance
Fiber optic connectorSFP
Other features
Connector(s)RJ-48
Ports & interfaces
Connectivity technologyWired
Power
Power consumption (typical)2.6 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-10 - 65 °C
Operating relative humidity (H-H)5 - 95 %
Operating altitude0 - 118110.2"
*
*
*
Products specifications
Attribute nameAttribute value
Design
Certification-10 - 65 °C
InternalY
Features
LED indicatorsY
Weight & dimensions
Dimensions (WxDxH)0.866 x 6.5 x 3.39"
Packaging data
Package weight15.9 oz
Performance
Fiber optic connectorSFP
Other features
Connector(s)RJ-48
Ports & interfaces
Connectivity technologyWired
Power
Power consumption (typical)2.6 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-10 - 65 °C
Operating relative humidity (H-H)5 - 95 %
Operating altitude0 - 118110.2"
Customer service
Information
Copyright © 2024 Middle Tennessee Office Products. All rights reserved.
Powered by nopCommerce