The ION C2210 device provides an interface between 10/100Base-TX ports and 100Base-FX ports allowing users to integrated fiber optic cabling into 10/100Base-TX copper environments.
- Auto-Negotiation of speed and duplex on TP port
- AutoCross™ on TP port
- Link Pass Through (LPT) fault monitoring
- Far-End-Fault (FEF) detection
- Pause (Software Controlled)
- Automatic Link Restoration
- Remote Firmware Upgrade
- Can be used in any ION Platform Chassis
- Standards based, will link with any standard 10/100Base-TX and any standard 100Base-FX ports
- The following manageable features are available when used in an ION Platform chassis along with an ION Management Module.
Report converter status to chassis management software:
- TP and Fiber Link Status
- Hardware switch settings
- Copper Port Speed
- TP and Fiber Port Duplex
- Fault condition
Write operation includes:
- Power on/off device
- Auto-Negotiation enable/disable
- Force 10 Mbps or 100 Mbps
- Force half or full duplex
- Select advertising modes when Auto-Negotiation is enabled
- LPT enable/disable
- FEF enable/disable
- Pause enable/disable
- AutoCross™ enable/disable
Products specifications
| Attribute name |
Attribute value |
|
Certification
|
1000 entries |
|
Internal
|
Y |
|
Fiber mode structure
|
Single-mode |
|
LED indicators
|
Y |
|
Dimensions (WxDxH)
|
78740.2" |
|
Package weight
|
15.9 oz |
|
Maximum data transfer rate
|
100 Mbit/s |
|
Maximum transfer distance
|
787401.6" |
|
Wavelength
|
1300 nm |
|
Networking standards
|
IEEE 802.3 |
|
Fiber optic connector
|
SC |
|
MAC address table
|
1000 entries |
|
Ethernet LAN (RJ-45) ports
|
1 |
|
Connectivity technology
|
Wired |
|
Power consumption (typical)
|
2.5 W |
|
Converter input interface
|
100Base-TX |
|
Converter output interface
|
100Base-FX |
