You have no items in your shopping cart.
Menu
Menu
Transition Networks C2110-1011 network media converter Internal 100 Mbit/s 1300 nm Multi-mode1

Transition Networks C2110-1011 network media converter Internal 100 Mbit/s 1300 nm Multi-mode

Transition Networks C2110-1011. Maximum data transfer rate: 100 Mbit/s, Converter input interface: 100Base-TX, Converter output interface: 100BASE-FX. Fiber optic connector: ST, Connectivity technology: Wired. Maximum transfer distance: 78740.2" (2000 m), Wavelength: 1300 nm, Fiber mode structure: Multi-mode. Certification: CISPR/EN55022 A, FCC A, CE. Power consumption (typical): 2.5 W
Manufacturer: Transition Networks
SKU: 6759948
Manufacturer part number: C2110-1011
UPC: 648177029198
MSRP: $296.00
$260.71
- Auto-Negotiation of speed and duplex on TP port - AutoCross™ on TP port - Link Pass Through (LPT) fault monitoring - Far-End-Fault (FEF) detection - Automatic Link Restoration - Pause advertisement - Remote Firmware Upgrade - Can be used in any ION Platform Chassis - Standards based, will link with any standard 100Base-TX and any standard 100Base-FX ports - The following manageable features are available when used in an ION chassis along with an ION Management Module Report converter status to chassis management software: - TP and Fiber Link Status - Hardware switch settings - Fault condition - TP cable length Write operation includes: - Power on/off device - Auto-Negotiation enable/disable - Pause enable/disable - LPT enable/disable - FEF enable/disable - AutoCross enable/disable
- Auto-Negotiation of speed and duplex on TP port - AutoCross™ on TP port - Link Pass Through (LPT) fault monitoring - Far-End-Fault (FEF) detection - Automatic Link Restoration - Pause advertisement - Remote Firmware Upgrade - Can be used in any ION Platform Chassis - Standards based, will link with any standard 100Base-TX and any standard 100Base-FX ports - The following manageable features are available when used in an ION chassis along with an ION Management Module Report converter status to chassis management software: - TP and Fiber Link Status - Hardware switch settings - Fault condition - TP cable length Write operation includes: - Power on/off device - Auto-Negotiation enable/disable - Pause enable/disable - LPT enable/disable - FEF enable/disable - AutoCross enable/disable
Products specifications
Attribute nameAttribute value
Design
Certification100BASE-FX
InternalY
Features
Fiber mode structureMulti-mode
LED indicatorsY
Weight & dimensions
Dimensions (WxDxH)0.866 x 5 x 3.39"
Packaging data
Package weight15.9 oz
Performance
Maximum data transfer rate100 Mbit/s
Fiber optic connectorST
Wavelength1300 nm
Networking standardsIEEE 802.3
Maximum transfer distance78740.2"
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Connectivity technologyWired
Power
Power consumption (typical)2.5 W
Network
Converter input interface100Base-TX
Converter output interface100Base-FX
*
*
*
Products specifications
Attribute nameAttribute value
Design
Certification100BASE-FX
InternalY
Features
Fiber mode structureMulti-mode
LED indicatorsY
Weight & dimensions
Dimensions (WxDxH)0.866 x 5 x 3.39"
Packaging data
Package weight15.9 oz
Performance
Maximum data transfer rate100 Mbit/s
Fiber optic connectorST
Wavelength1300 nm
Networking standardsIEEE 802.3
Maximum transfer distance78740.2"
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Connectivity technologyWired
Power
Power consumption (typical)2.5 W
Network
Converter input interface100Base-TX
Converter output interface100Base-FX
Customer service
Information
Copyright © 2024 Middle Tennessee Office Products. All rights reserved.
Powered by nopCommerce