Convert and extend a 10/100 Mbps Ethernet connection up to 2 km over Multi Mode ST fiber
The MCM110ST2 10/100 Multi Mode ST Fiber Ethernet Media Converter (2 km) creates a cost-effective Ethernet to fiber link, transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone.
The ST media converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations using ST-terminated multimode fiber, while delivering solid network performance and scalability.
Easy to setup and install, this compact, value-conscious fast Ethernet media converter features auto-switching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, Full and Half Duplex, as well as LFP (Link Fault pass-through) on/off.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
- Improve network scalability by increasing the distances between network points by up to 2km (Multi-mode)
- Compact, lightweight enclosure is easily mounted or placed into any location with little to no configuration needed
- Provides increased bandwidth and high data throughput by eliminating network bottlenecks and congestion
Products specifications
| Attribute name |
Attribute value |
|
Width
|
2.95" |
|
Depth
|
3.74" |
|
Weight
|
2.89 oz |
|
Height
|
0.787" |
|
Housing Material
|
Plastic |
|
Wavelength-division multiplexing (WDM)
|
No |
|
Compliance certificates
|
RoHS |
|
Certification
|
CE, FCC, TAA, REACH |
|
Internal
|
No |
|
Sustainability certificates
|
RoHS |
|
Mean time between failures (MTBF)
|
10BASE-T, 100BASE-T, 1000BASE-T |
|
Data transfer rate
|
100 Mbit/s |
|
Output current
|
0.2 A |
|
Output voltage
|
12 V |
|
LED indicators
|
Yes |
|
Package depth
|
Gray |
|
Package width
|
5.71" |
|
Package height
|
2.4" |
|
Package weight
|
9.63 oz |
|
Manual
|
Yes |
|
AC adapter included
|
Yes |
|
Maximum data transfer rate
|
100 Mbit/s |
|
Fiber optic connector
|
ST |
|
Duplex system
|
Full, Half |
|
Maximum transfer distance
|
78740.2" |
|
Wavelength
|
1310 nm |
|
Sensitivity
|
-31 dBmW |
|
Link budget
|
11 dB |
|
Networking standards
|
IEEE 802.3, IEEE 802.3u |
|
Ethernet LAN (RJ-45) ports
|
1 |
|
Connectivity technology
|
Wired |
|
Power consumption (typical)
|
12 V |
|
Input voltage
|
100 - 240 V |
|
Power plug type
|
Type M |
|
Ethernet LAN data rates
|
10,100 Mbit/s |
|
Converter input interface
|
10Base-T, 100BASE-FX, 100Base-TX |
|
Operating temperature (T-T)
|
0 - 50 °C |
|
Storage temperature (T-T)
|
-10 - 70 °C |
|
Operating relative humidity (H-H)
|
10 - 90 % |
|
Power over Ethernet (PoE)
|
No |
