Intellinet 508544 network media converter 850 nm Multi-mode

Intellinet 508544. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z, Ethernet interface type: Fast Ethernet, Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s. Fiber optic connector: SC, Connectivity technology: Wired. Maximum transfer distance: 21653.5" (550 m), Wavelength: 850 nm, Fiber mode structure: Multi-mode. LED indicators: LAN, Link, Power, Signal strength, Housing material: Metal, Certification: FCC Class B, CE, RoHS, UKCA, NDAA. Width: 3.7" (94 mm), Depth: 2.76" (70 mm), Height: 1.02" (26 mm)
Manufacturer: Intellinet
SKU: 6299666
Manufacturer part number: 508544
UPC: 0766623508544
MSRP: $82.99
$81.38
Media Converter with Gigabit Ethernet - Expand the size of an existing network
The Intellinet Network Solutions Gigabit Ethernet Media Converter offers the network designer a device for migration from copper-based Ethernet to Fiber Ethernet. It offers maximum flexibility with 10/100/1000Base-TX and auto-negotiation. Now, migration or expansion of existing networks can be achieved with minimum cost and complexity.

More connectivity options
The converter is completely transparent to the network, so the network performs exactly the way it did before, only now it can support both copper and fiber media. The Gigabit Ethernet Media Converter provides fiber connectivity to Ethernet segments, allowing for even greater networking expansion between extended workgroups. It also provides building-to-building connectivity without the cost and disruption associated with installing additional routers.

Distance extension between networking devices
Connecting the converter to fiber segments further extends distances between network nodes, offering increased spatial and distance options for networks where none existed before.

Greater cabling flexibility
Network managers can install fiber cabling anywhere within a network without changing the arrangement of their copper-based Ethernet. The compact size of the converter allows it to be easily deployed in any narrow desktop location or to be used in a wall-mount installation. Several Gigabit Ethernet Media Converters can be simultaneously installed into a 19" rackmountable chassis (available from Intellinet Network Solutions), providing much-needed flexibility for networks.

 

  • One 10/100/1000 RJ45 port supporting a maximum distance of 100 m (300 ft.)
  • One 1000Base-SX fiber SC multi-mode port supporting a maximum distance of 550 m (1,800 ft.)
  • Supports full-duplex and half-duplex modes with autonegotiation
  • Link Fault Passthrough (LFP) function for easier network maintenance
  • QoS (Quality of Service) bandwidth management
  • IEEE 802.1Q VLAN tagging compliant
  • Cut-through and store-and-forward switching architecture
  • Wavelength: 850 nm
  • Supports jumbo frames up to 9.2 kBytes
  • Status LEDs for power and Link/TX on both ports
  • External 5 VDC power adapter
  • Functions as a stand-alone converter or can be used with the 14-slot Media Converter Chassis, model 507356
  • Fully NDAA-compliant
Media Converter with Gigabit Ethernet - Expand the size of an existing network
The Intellinet Network Solutions Gigabit Ethernet Media Converter offers the network designer a device for migration from copper-based Ethernet to Fiber Ethernet. It offers maximum flexibility with 10/100/1000Base-TX and auto-negotiation. Now, migration or expansion of existing networks can be achieved with minimum cost and complexity.

More connectivity options
The converter is completely transparent to the network, so the network performs exactly the way it did before, only now it can support both copper and fiber media. The Gigabit Ethernet Media Converter provides fiber connectivity to Ethernet segments, allowing for even greater networking expansion between extended workgroups. It also provides building-to-building connectivity without the cost and disruption associated with installing additional routers.

Distance extension between networking devices
Connecting the converter to fiber segments further extends distances between network nodes, offering increased spatial and distance options for networks where none existed before.

Greater cabling flexibility
Network managers can install fiber cabling anywhere within a network without changing the arrangement of their copper-based Ethernet. The compact size of the converter allows it to be easily deployed in any narrow desktop location or to be used in a wall-mount installation. Several Gigabit Ethernet Media Converters can be simultaneously installed into a 19" rackmountable chassis (available from Intellinet Network Solutions), providing much-needed flexibility for networks.

 

  • One 10/100/1000 RJ45 port supporting a maximum distance of 100 m (300 ft.)
  • One 1000Base-SX fiber SC multi-mode port supporting a maximum distance of 550 m (1,800 ft.)
  • Supports full-duplex and half-duplex modes with autonegotiation
  • Link Fault Passthrough (LFP) function for easier network maintenance
  • QoS (Quality of Service) bandwidth management
  • IEEE 802.1Q VLAN tagging compliant
  • Cut-through and store-and-forward switching architecture
  • Wavelength: 850 nm
  • Supports jumbo frames up to 9.2 kBytes
  • Status LEDs for power and Link/TX on both ports
  • External 5 VDC power adapter
  • Functions as a stand-alone converter or can be used with the 14-slot Media Converter Chassis, model 507356
  • Fully NDAA-compliant
Products specifications
Attribute nameAttribute value
Width3.7"
Depth2.76"
Height1.02"
Housing MaterialMetal
Quick installation guideYes
Warranty period3 year(s)
Link Fault Pass-through (LFP)Yes
Design
CertificationFCC Class B, CE, RoHS, UKCA, NDAA
InternalNo
Features
Fiber mode structureMulti-mode
LED indicatorsLAN, Link, Power, Signal strength
Packaging content
ManualYes
AC adapter includedYes
Performance
Fiber optic connectorSC
Maximum transfer distance21653.5"
Wavelength850 nm
Duplex systemFull, Half
Fiber cable diameters supported (core/cladding)50/125,62.5/125 µm
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z
Fiber ports quantity2
Tx power (min)-9 dBmW
Tx power (max)-3 dBmW
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Connectivity technologyWired
Power
External power adapterYes
Network
Cable types supportedCat5e
Ethernet interface typeFast Ethernet, Gigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Jumbo frames supportYes
Auto-negotiationYes
Jumbo frames9.2
Quality of Service (QoS) supportYes
VLAN supportYes
Operational conditions
Operating temperature (T-T)-10 - 55 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)5 - 90 %
Protocols
Supported network protocolsUTP/STP
*
*
*
Products specifications
Attribute nameAttribute value
Width3.7"
Depth2.76"
Height1.02"
Housing MaterialMetal
Quick installation guideYes
Warranty period3 year(s)
Link Fault Pass-through (LFP)Yes
Design
CertificationFCC Class B, CE, RoHS, UKCA, NDAA
InternalNo
Features
Fiber mode structureMulti-mode
LED indicatorsLAN, Link, Power, Signal strength
Packaging content
ManualYes
AC adapter includedYes
Performance
Fiber optic connectorSC
Maximum transfer distance21653.5"
Wavelength850 nm
Duplex systemFull, Half
Fiber cable diameters supported (core/cladding)50/125,62.5/125 µm
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z
Fiber ports quantity2
Tx power (min)-9 dBmW
Tx power (max)-3 dBmW
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Connectivity technologyWired
Power
External power adapterYes
Network
Cable types supportedCat5e
Ethernet interface typeFast Ethernet, Gigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Jumbo frames supportYes
Auto-negotiationYes
Jumbo frames9.2
Quality of Service (QoS) supportYes
VLAN supportYes
Operational conditions
Operating temperature (T-T)-10 - 55 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)5 - 90 %
Protocols
Supported network protocolsUTP/STP