The Cisco SFP-10G-BXD-I and SFP-10G-BXU-I SFPs operate on a single strand of standard SMF.
A SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard SMF with an operating transmission range up to 10 km.
The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. SFP-10G-BXD-I transmits a 1330-nm channel and receives a 1270-nm signal, whereas SFP-10G-BXU-I transmits at a 1270-nm wavelength and receives a 1330-nm signal. The presence of a wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1270-nm and 1330-nm light paths.
Products specifications
| Attribute name |
Attribute value |
|
Width
|
0.528" |
|
Depth
|
2.22" |
|
Height
|
0.335" |
|
Harmonized System (HS) code
|
85369010 |
|
Certification
|
MSA |
|
Hot-Plug support
|
Y |
|
Number of products included
|
1 pc(s) |
|
Interface type
|
SFP+ |
|
Fiber optic connector
|
LC |
|
SFP transceiver standard
|
BX |
|
Maximum transfer distance
|
393700.8" |
|
Wavelength
|
1330 nm |
|
Fiber cable diameters supported (core/cladding)
|
9/125 µm |
|
Networking standards
|
IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u |
|
Cabling technology
|
10GBASE-BXD |
|
SFP transceiver type
|
Fiber optic |
|
Maximum data transfer rate
|
10000 Mbit/s |
|
Single-mode fiber (SMF) supported
|
Y |
|
Auto MDI/MDI-X
|
Y |
|
Operating temperature (T-T)
|
-40 - 85 °C |
|
Storage temperature (T-T)
|
-40 - 85 °C |
|
Operating relative humidity (H-H)
|
0 - 95 % |
|
Storage relative humidity (H-H)
|
0 - 95 % |
