Cisco Catalyst WS-C4948-S network switch Managed

Cisco Catalyst WS-C4948-S. Switch type: Managed. Basic switching RJ-45 Ethernet ports quantity: 52. Full duplex. MAC address table: 32768 entries, Switching capacity: 96 Gbit/s. Networking standards: IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE...
Manufacturer: Cisco
SKU: 10002262
Manufacturer part number: WS-C4948-S
MSRP: $7,500.00
$6,125.63
The Cisco® Catalyst® 4948 is a wire-speed, low-latency, Layer 2-4, 1-rack-unit (1 RU) fixed-configuration switch for rack-optimized server switching. Based on the proven Cisco Catalyst 4500 Series hardware and software architecture, the Cisco Catalyst 4948 Series offers exceptional performance and reliability for low density, multilayer aggregation of high performance servers and workstations. The Cisco Catalyst 4948 offers 48 ports of wire-speed 10/100/1000BASE-T with 4 alternative wired ports that can accommodate optional 1000BASE-X Small Form-Factor Pluggable (SFP) optics1. Exceptional reliability and serviceability are delivered with optional internal AC or DC 1 + 1 hot-swappable power supplies and a hot-swappable fan tray with redundant fans.
The Cisco® Catalyst® 4948 is a wire-speed, low-latency, Layer 2-4, 1-rack-unit (1 RU) fixed-configuration switch for rack-optimized server switching. Based on the proven Cisco Catalyst 4500 Series hardware and software architecture, the Cisco Catalyst 4948 Series offers exceptional performance and reliability for low density, multilayer aggregation of high performance servers and workstations. The Cisco Catalyst 4948 offers 48 ports of wire-speed 10/100/1000BASE-T with 4 alternative wired ports that can accommodate optional 1000BASE-X Small Form-Factor Pluggable (SFP) optics1. Exceptional reliability and serviceability are delivered with optional internal AC or DC 1 + 1 hot-swappable power supplies and a hot-swappable fan tray with redundant fans.

Products specifications

Attribute name Attribute value
Latency 6 microseconds for 64-byte packets
Switching protocols EIGRP, OSPF, RIP, RIP2, MBGP, HSRP, IGMPv1-3, DVMRP
Memory and processor Flash Memory 16 MB
Switching capacity 96 Gbit/s
Weight 4.41 lbs
Switch Type Managed
Built-in processor Y
Technical details
Management platform Cisco CLI, Cisco Works LMS
Features
Full duplex Y
Safety UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950, IEC 60825-1, IEC 60825-2, EN 60825-1, EN 60825-2, 21 CFR 1040
Weight & dimensions
Dimensions (WxDxH) 17.3 x 15.8 x 1.75"
Packaging data
Bundled software Standard multilayer image Software (EMI)includes: Routing Information Protocol Version 1 (RIPv1), RIPv2, static routes, AppleTalk, and Internetwork Packet Exchange (IPX) software routing
Performance
Maximum data transfer rate 1 Gbit/s
Processor frequency 266 MHz
Networking standards IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3u, IEEE 802.3z
Other features
Data link protocols Ethernet, Fast Ethernet, Gigabit Ethernet
MAC address table 32768 entries
I/O ports 48x 10/100/1000 Ports 4x SFP Gigabit Ethernet ports Power Adapter port
Packet transfer speed 72 Mpps
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 52
Power
Power consumption (typical) 300 W
Operational conditions
Storage temperature (T-T) -40 - 75 °C
Operating temperature (T-T) 0 - 45 °C
Operating relative humidity (H-H) 10 - 90 %
System requirements
Minimum RAM 256 MB
Protocols
Management protocols GMP, ICMP, SNMP, Telnet, TFTP, RMON
*
*
*

Products specifications

Attribute name Attribute value
Latency 6 microseconds for 64-byte packets
Switching protocols EIGRP, OSPF, RIP, RIP2, MBGP, HSRP, IGMPv1-3, DVMRP
Memory and processor Flash Memory 16 MB
Switching capacity 96 Gbit/s
Weight 4.41 lbs
Switch Type Managed
Built-in processor Y
Technical details
Management platform Cisco CLI, Cisco Works LMS
Features
Full duplex Y
Safety UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950, IEC 60825-1, IEC 60825-2, EN 60825-1, EN 60825-2, 21 CFR 1040
Weight & dimensions
Dimensions (WxDxH) 17.3 x 15.8 x 1.75"
Packaging data
Bundled software Standard multilayer image Software (EMI)includes: Routing Information Protocol Version 1 (RIPv1), RIPv2, static routes, AppleTalk, and Internetwork Packet Exchange (IPX) software routing
Performance
Maximum data transfer rate 1 Gbit/s
Processor frequency 266 MHz
Networking standards IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3u, IEEE 802.3z
Other features
Data link protocols Ethernet, Fast Ethernet, Gigabit Ethernet
MAC address table 32768 entries
I/O ports 48x 10/100/1000 Ports 4x SFP Gigabit Ethernet ports Power Adapter port
Packet transfer speed 72 Mpps
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 52
Power
Power consumption (typical) 300 W
Operational conditions
Storage temperature (T-T) -40 - 75 °C
Operating temperature (T-T) 0 - 45 °C
Operating relative humidity (H-H) 10 - 90 %
System requirements
Minimum RAM 256 MB
Protocols
Management protocols GMP, ICMP, SNMP, Telnet, TFTP, RMON