You have no items in your shopping cart.
Menu
Menu
Allied Telesis AT-IMC2000TP/SP-980 network media converter 1000 Mbit/s 850 nm Gray1
Allied Telesis AT-IMC2000TP/SP-980 network media converter 1000 Mbit/s 850 nm Gray1 Allied Telesis AT-IMC2000TP/SP-980 network media converter 1000 Mbit/s 850 nm Gray2

Allied Telesis AT-IMC2000TP/SP-980 network media converter 1000 Mbit/s 850 nm Gray

Allied Telesis AT-IMC2000TP/SP-980. Maximum data transfer rate: 1000 Mbit/s, Converter input interface: 10Base-T, 100Base-T, 1000Base-T, Converter output interface: 100Base-X, 1000Base-X. Fiber optic connector: SFP, Connectivity technology: Wired. Wavelength: 850 nm, Tx power (min): -9.5 dBmW, Tx power (max): -4 dBmW. Product color: Gray, International Protection (IP) code: IP30, Safety: UL 62368-1, EN 62368-1, UL 60950-1 (UL mark), CAN/CSA C22.2 No. 60950-1 (cUL mark), EN 60950-1.... Input voltage: 51 - 57 V
Manufacturer: Allied Telesis
Availability: Out of Stock - on backorder and will be dispatched once in stock.
SKU: 5517983
Manufacturer part number: 990-005565-980
UPC: 0767035210599
MSRP: $1,288.00
$928.31
10/100/1000T to 100Mbps/1000Mbps SFP industrial temperature PoE+ media converter. These converters support 802.3at, PoE+, 30W, LTPoE++ and 4-pair up to 70W. The IMC2000TP/SP-980 features Remote Power Cycle and Smart MissingLink™ (SML) and is fanless for silent operation. Powering remote devices Allied Telesis IMC200/2000 Series Industrial Media Converters (IMCs) are ideal for powering remote devices, such as IP phones, video cameras and wireless Access Points (APs), which are more than 100m from a Power over Ethernet (PoE) switch. Each IMC can provide up to 70W of PoE. The 2000T/SP and the 2000TP/SP each feature a 10/100/1000T twisted-pair port, and an SFP port which supports and auto detects 100X and 1000X optics. No switch configuration is needed. Allied Telesis offers a wide variety of SFPs featuring multimode, single mode and BiDi optics. Models with a fixed fiber-optic port are available with SC or LC connectors. With these, you can achieve distances up to 2 km (100Mps) or 550 m (1000Mps). With the SFP model, you can achieve greater distances using a long-range SFP. In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote PoE powered device to operate without any additional power source. All PoE+ devices (IEEE802.3at compliant) are supported. All PoE+ devices support 802.3at, PoE+, LTPoE++ and 4-pair. The PC200x PoE+ Series can deliver up to 70W of power to the remote device. Remote Power Cycle The IMC200/2000 Series supports the Remote Power Cycle feature. This allows a remote administrator to log in to the host switch device and disable the switch port to which the IMC is attached, causing the PoE+ device to lose power. This allows administrators to reset remote devices without physically going to the location. Jumbo frame support Many backbone switch products support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) which sends extra-long data packets on the network. The IMC200/2000 Series are fully compatible with these long packets, enabling them to be used in modern networks. Smart MissingLink™ (SML) The SML feature monitors network connections and provides a notification when a link fails, allowing administrators to quickly identify the source and location of failed links, and thus minimize downtime.

 

  • Converts speed as well as media type
  • Supports 802.3at, PoE+, 30W and LTPoE++, 4-pair up to 70W
  • Supplies up to 70W of PoE power
  • Supports 100 and 1000Mbps fiber SFP modules (IMC2000/SP)
  • Auto MDI/MDI-X
  • Smart Missing Link (SML)
  • Supports up to 10K jumbo frames
  • Supports multi-mode fiber
  • 4K MAC address table
  • Store-and-forward switching mode
  • Transparent to IEEE 802.1Q packets
  • Standalone or DIN rail mount
  • Fanless for silent operation
10/100/1000T to 100Mbps/1000Mbps SFP industrial temperature PoE+ media converter. These converters support 802.3at, PoE+, 30W, LTPoE++ and 4-pair up to 70W. The IMC2000TP/SP-980 features Remote Power Cycle and Smart MissingLink™ (SML) and is fanless for silent operation. Powering remote devices Allied Telesis IMC200/2000 Series Industrial Media Converters (IMCs) are ideal for powering remote devices, such as IP phones, video cameras and wireless Access Points (APs), which are more than 100m from a Power over Ethernet (PoE) switch. Each IMC can provide up to 70W of PoE. The 2000T/SP and the 2000TP/SP each feature a 10/100/1000T twisted-pair port, and an SFP port which supports and auto detects 100X and 1000X optics. No switch configuration is needed. Allied Telesis offers a wide variety of SFPs featuring multimode, single mode and BiDi optics. Models with a fixed fiber-optic port are available with SC or LC connectors. With these, you can achieve distances up to 2 km (100Mps) or 550 m (1000Mps). With the SFP model, you can achieve greater distances using a long-range SFP. In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote PoE powered device to operate without any additional power source. All PoE+ devices (IEEE802.3at compliant) are supported. All PoE+ devices support 802.3at, PoE+, LTPoE++ and 4-pair. The PC200x PoE+ Series can deliver up to 70W of power to the remote device. Remote Power Cycle The IMC200/2000 Series supports the Remote Power Cycle feature. This allows a remote administrator to log in to the host switch device and disable the switch port to which the IMC is attached, causing the PoE+ device to lose power. This allows administrators to reset remote devices without physically going to the location. Jumbo frame support Many backbone switch products support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) which sends extra-long data packets on the network. The IMC200/2000 Series are fully compatible with these long packets, enabling them to be used in modern networks. Smart MissingLink™ (SML) The SML feature monitors network connections and provides a notification when a link fails, allowing administrators to quickly identify the source and location of failed links, and thus minimize downtime.

 

  • Converts speed as well as media type
  • Supports 802.3at, PoE+, 30W and LTPoE++, 4-pair up to 70W
  • Supplies up to 70W of PoE power
  • Supports 100 and 1000Mbps fiber SFP modules (IMC2000/SP)
  • Auto MDI/MDI-X
  • Smart Missing Link (SML)
  • Supports up to 10K jumbo frames
  • Supports multi-mode fiber
  • 4K MAC address table
  • Store-and-forward switching mode
  • Transparent to IEEE 802.1Q packets
  • Standalone or DIN rail mount
  • Fanless for silent operation
Products specifications
Attribute nameAttribute value
Depth5 V
Height1.38"
Width4.37"
Weight26.4 oz
Design
CertificationTAA EMI/Emission & Stability FCC Class A EN55024 (immunity standard) EN55032 Class A EN55035 VCCI Class A
InternalN
DIN rail mountingY
Technical details
Product colorGray
Sustainability certificatesRoHS
Features
SafetyUL 62368-1, EN 62368-1, UL 60950-1 (UL mark), CAN/CSA C22.2 No. 60950-1 (cUL mark), EN 60950-1 (TUV mark)
LED indicatorsY
International Protection (IP) codeIP30
Performance
Tx power (max)0 - 118110.2"
Rx power (max)-18 dBmW
Rx power (min)-17 dBmW
Tx power (min)-9.5 dBmW
Fiber optic connectorSFP
Wavelength850 nm
Duplex systemFull, Half
Maximum data transfer rate1000 Mbit/s
Auto MDI/MDI-XY
Fiber ports quantity1
Ports & interfaces
Power over Ethernet plus (PoE+) ports quantityFull HD
Connectivity technologyWired
Power
Input voltage51 - 57 V
Network
Converter output interface100Base-X, 1000Base-X
Converter input interface10Base-T, 100Base-T, 1000Base-T
Ethernet interface typeFast Ethernet, Gigabit Ethernet
Jumbo frames10000
Packet forwarding rate (10 Mbps)14880 pps
Packet forwarding rate (100 Mbps)148800 pps
Packet forwarding rate (1 Gbps)1488000 pps
Ethernet LAN data rates10,100,1000 Mbit/s
Jumbo frames supportY
Auto-negotiationY
VLAN supportY
Operational conditions
Operating temperature (T-T)-40 - 75 °C
Storage temperature (T-T)-40 - 85 °C
Operating relative humidity (H-H)5 - 95 %
Storage relative humidity (H-H)5 - 95 %
Operating altitude0 - 120000"
Data transmission
Store-and-forwardY
Power over Ethernet (PoE)
Power over Ethernet (PoE)Y
*
*
*
Products specifications
Attribute nameAttribute value
Depth5 V
Height1.38"
Width4.37"
Weight26.4 oz
Design
CertificationTAA EMI/Emission & Stability FCC Class A EN55024 (immunity standard) EN55032 Class A EN55035 VCCI Class A
InternalN
DIN rail mountingY
Technical details
Product colorGray
Sustainability certificatesRoHS
Features
SafetyUL 62368-1, EN 62368-1, UL 60950-1 (UL mark), CAN/CSA C22.2 No. 60950-1 (cUL mark), EN 60950-1 (TUV mark)
LED indicatorsY
International Protection (IP) codeIP30
Performance
Tx power (max)0 - 118110.2"
Rx power (max)-18 dBmW
Rx power (min)-17 dBmW
Tx power (min)-9.5 dBmW
Fiber optic connectorSFP
Wavelength850 nm
Duplex systemFull, Half
Maximum data transfer rate1000 Mbit/s
Auto MDI/MDI-XY
Fiber ports quantity1
Ports & interfaces
Power over Ethernet plus (PoE+) ports quantityFull HD
Connectivity technologyWired
Power
Input voltage51 - 57 V
Network
Converter output interface100Base-X, 1000Base-X
Converter input interface10Base-T, 100Base-T, 1000Base-T
Ethernet interface typeFast Ethernet, Gigabit Ethernet
Jumbo frames10000
Packet forwarding rate (10 Mbps)14880 pps
Packet forwarding rate (100 Mbps)148800 pps
Packet forwarding rate (1 Gbps)1488000 pps
Ethernet LAN data rates10,100,1000 Mbit/s
Jumbo frames supportY
Auto-negotiationY
VLAN supportY
Operational conditions
Operating temperature (T-T)-40 - 75 °C
Storage temperature (T-T)-40 - 85 °C
Operating relative humidity (H-H)5 - 95 %
Storage relative humidity (H-H)5 - 95 %
Operating altitude0 - 120000"
Data transmission
Store-and-forwardY
Power over Ethernet (PoE)
Power over Ethernet (PoE)Y
Product tags
  • (62435)
Customer service
Information
Copyright © 2024 Middle Tennessee Office Products. All rights reserved.
Powered by nopCommerce